| One of the best ways to improve the productivity of your spiral duct and fittings operations is to optimize your seam closing processes. By automating this process with the Dual Head Gore-Locker from Lockformer, you can save both time and labor while also creating a safer fittings department for your operators. Learn how the Lockformer Dual Head Gore-Locker allows you to fabricate and close quality standing seam fittings all on one machine. |
Key StatsCapacity: 16 gauge |
The Lockformer Dual Head Gore-Locker produces of HVAC spiral/round duct gored elbows, reducers, end-caps, and off-sets. On the same machine, operators can also lange or swage on one end while simultaneously closing the seam at the other end. This dual functionality uses minimal power and saves both time and floor space, boosting productivity and optimizing shop flow for maximum output.
The Gore-Locker allows operators to modify controls when flanging and swaging, providing complete control of production speeds and the pneumatic-activated support rollers and a stronger closing station makes it safer and easier for the operator to remove parts. The machine delivers an airtight seal that eliminates the need for manual processes like sealing or painting, further boosting efficiency in your fittings operations.
The Gore-Locker handles a variety of materials and thicknesses – up to 16 gauge (1.5mm) – to produce standing rib diameters from 4″ to 60″ (100 1500mm) with included tooling and can produce standing rib diameters from 4″ and 50″- 60″ with additional tooling.
See the Lockformer Dual Head Gore-Locker at AHR Expo 2024The Lockformer Dual Head Gore-Locker, along with 8 more of Mestek Machinery's top sheet metal fabricating machines, will be set up for live demonstrations throughout the 2024 AHR Expo on January 22 to 24, 2024 at the McCormick Center in Chicago, IL. Click here to learn more about visiting Mestek Machinery at the AHR Expo. |
|